-
  1. All Products
  2. S&B Filters - 37 Gallon Spare Tire Water Tank | 07-24 Sprinter

S&B Filters - 37 Gallon Spare Tire Water Tank | 07-24 Sprinter

https://www.overlanddesignbuild.com/web/image/product.template/682/image_1920?unique=17816ef
​Tank Dimensions: 29.33" Length x 31.28" Width x 12" Height
TEI Tested & Listed / RVIA Approved.


Important: This water tank wont fit the 170" EXT or with hitches.

$ 349.00 349.0 USD $ 349.00

$ 349.00

Not Available For Sale

This combination does not exist.

Contact Us


S&B 37 GALLON SPARE TIRE WATER TANK

The S&B 37-gallon spare tire water tank is made from food-grade safe, BPA-free polyethylene plastic and is TEI listed. Our tanks are perfect for your home build or build needing RVIA certification. We make our tanks in-house and pressure test every tank.​


PRODUCT OVERVIEW VIDEO

Check out the video overview detailing the installation process and features and benefits for the S&B 37 Gallon spare tire water tank for the Mercedes Sprinter.​


KUS LEVEL SENSOR INSTALLATION VIDEO

Watch our step by step installation process for the KUS level sensor.


  • Tuned 3.3 Fast Adjust Inverted Rally Struts, 1 pair
  • Rate Cup, Bushing Preload Washer, 1 pair
  • Shock Boots
  • Mounting Hardware





FITMENT: NOTE: Van Compass updated their auxiliary bracket in October 2022. If your VC bracket was installed before that date, you will either need their brackets modified, or the latest revision of upper shock brackets, available here.

NOTE: Alignment required after installation.

Simple installation with no permanent modifications to your van. Pedal Control 2.0 daisy chains easily between just above the throttle. It installs in about a minute or two. Then you simply download the app and you can select the program best for you. 

Does not affect vehicle warranty and does not add any HP to the van. The product smooths the power delivery and makes the van more responsive to driver inputs. 

PLEASE CAREFULLY READ AND UNDERSTAND THE INSTRUCTION MANUAL BEFORE ATTEMPTING INSTALLATION.

The Pedal Control 2.0 has been carefully designed and rigorously tested. Please follow all installation instructions

  1. Turn off the ignition and wait five minutes.
  2. Loosen the plug connection from the original plug adapter.
  3. Attach both OEM connectors to the accelerator pedal sensor.
  4. Lay the cables in such a way that they are securely installed and are not interfering with anything else.
  5. Relocate the Pedal Control to a suitable location.
  6. Launch the app from your smartphone.
  7. Pair your smartphone to the Pedal Control with the default PIN “123456”

Never install or remove with the ignition system active. Always switch off the ignition and wait 5 minutes for all electrical systems to power down and fully discharge. Some vehicles may require additional time to power down.

On most vehicles, the connection for the Pedal Control 2.0 is close to the accelerator pedal or the steering column. You must ensure that the Pedal Control and the associated wiring loom do not interfere with the operation of the pedal or the steering and are secured at all times. 

PEDAL CONTROL 2.0 SOFTWARE IS ONLY AVAILABLE FOR USA AND CANADA. WE DO NOT HAVE ACCESS TO SOFTWARE FOR EUROPE OR THE REST OF THE WORLD AT THIS TIME!

Start with the customer – find out what they want and give it to them.

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.