-
  1. All Products
  2. Mid City Engineering - OEM 360 Degree Camera On-Demand ODB Programmer | 19-23 Sprinter

Mid City Engineering - OEM 360 Degree Camera On-Demand ODB Programmer | 19-23 Sprinter

https://overlanddb-odbsh.odoo.com/web/image/product.template/48/image_1920?unique=ae84934

Allows OEM 360 camera button to work at speeds above 10mph.

Two programming options:
1) Allows OEM 360-degree camera to be turned on at speeds above 10 MPH
2) Use 360 camera without any 10 MPH auto cutoff for full control.

The OEM 360 camera button only activates the 360-degree camera at speeds below 10 MPH. Remove that limitation with this programmer. 

*Note:
• Vehicles equipped with a backup camera will only allow for a backup camera on-demand if it is equipped with the factory parking sensors.
• If the vehicle only has a rear camera with NO parking sensors, the 907OBD360 programmer will not work at all.

$ 249.00 249.0 USD $ 249.00

$ 249.00

Not Available For Sale

This combination does not exist.

Contact Us


Compatible Vehicles:
  • Sprinter 2019-2024

Note:

  • Only compatible with MBUX equipped Sprinters with OEM 360 camera or backup camera only MBUX Sprinters with factory parking sensors. 
  • This is a single vehicle use programmer. The programmer will not work on multiple vehicles- but the same vehicle can be programmed multiple times, if needed.

​Mercedes-Benz Sprinter 2019-2024


Note: only compatible with MBUX equipped Sprinters with OEM 360 camera or backup camera only MBUX Sprinters with factory parking sensors.  

Fits: 2007+ Mercedes and Freightliner Sprinter vans (2500, 3500. Includes 4 and 6 cylinder)


Click here for installation / programming instructions

Simple installation with no permanent modifications to your van. Pedal Control 2.0 daisy chains easily between just above the throttle. It installs in about a minute or two. Then you simply download the app and you can select the program best for you. 

Does not affect vehicle warranty and does not add any HP to the van. The product smooths the power delivery and makes the van more responsive to driver inputs. 

PLEASE CAREFULLY READ AND UNDERSTAND THE INSTRUCTION MANUAL BEFORE ATTEMPTING INSTALLATION.

The Pedal Control 2.0 has been carefully designed and rigorously tested. Please follow all installation instructions

  1. Turn off the ignition and wait five minutes.
  2. Loosen the plug connection from the original plug adapter.
  3. Attach both OEM connectors to the accelerator pedal sensor.
  4. Lay the cables in such a way that they are securely installed and are not interfering with anything else.
  5. Relocate the Pedal Control to a suitable location.
  6. Launch the app from your smartphone.
  7. Pair your smartphone to the Pedal Control with the default PIN “123456”

Never install or remove with the ignition system active. Always switch off the ignition and wait 5 minutes for all electrical systems to power down and fully discharge. Some vehicles may require additional time to power down.

On most vehicles, the connection for the Pedal Control 2.0 is close to the accelerator pedal or the steering column. You must ensure that the Pedal Control and the associated wiring loom do not interfere with the operation of the pedal or the steering and are secured at all times. 

PEDAL CONTROL 2.0 SOFTWARE IS ONLY AVAILABLE FOR USA AND CANADA. WE DO NOT HAVE ACCESS TO SOFTWARE FOR EUROPE OR THE REST OF THE WORLD AT THIS TIME!

Start with the customer – find out what they want and give it to them.

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.